This paper presents voltage regulation and maximum power point tracking (MPPT) control schemes for a class of DC-microgrids. The DC-microgrid under consideration consists of a photovoltaic (PV) panel, battery, along with constant resistance and constant power loads.
How to integrate solar photovoltaic systems into a microgrid?
Integration of solar photovoltaic (PV) systems into a microgrid is accomplished with the help of a dual-diode, dual-capacitor, and single-switch DC-DC boost converter. At the output, a power of 400W transfer is achieved together with a voltage gain of 3.92.
Does voltage rise regulation improve power quality and continuous operation of RDG?
This research paper presents the voltage rise regulation strategy at the PCC to enhance power quality and continuous operation of RDG, such as Photovoltaic Arrays (PVAs) connected to a DN.
Hence, the general power and voltage are strengthened and regulated at the PCC as specified by IEEE-1547 and by the Southern Africa grid code requirement to ensure continuous operation of the PVAs, which is the second stage of the conversion (DC-AC).
What is the voltage output of a solar power system?
The solar voltage output is about 1005 V between 0 s and 0.61 s, it reaches 295 V at 0.55 s and maintains its stability. The boost converter boosts the PVA's voltage at 0.61 s from 295 V to 500 V and the system reaches its steady state at 0.62 s, while the duty cycle of the boost converter is maintained at 0.41, as shown in Figure 13 g.
How to regulate PCC voltage rise issue without disconnecting RDG integration?
Strategic regulation of PCC voltage rise issue through the generation of positive reactive power without disconnecting RDG integration with higher penetration levels. In-loop second order integral filtering algorithm is designed to filter grid current distortions generated from the non-linear loads.
It is required to have a DC/DC power converter to keep the voltage on the DC bus constant and uniform to deliver the necessary quantity of power . Molten carbonate (MCFC), solid oxide (SOFC), alkaline (AFC), and protons (PEMFC) are the four different types of electrolytes that may be used in FCs.